Search Results

Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

2002-09-20

HISTORICAL

J1119_200209

The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.

Standard

STEEL PRODUCTS FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) AND FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)

1980-04-01

HISTORICAL

J1119_198004

The purpose of this information report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.

Standard

STEEL PRODUCTS FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) AND FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)

1976-09-01

HISTORICAL

J1119_197609

The compositions and mechanical properties are only suggested to ensure good weldability and good formability in conjunction with control of mechanical properties. The particular design must be considered to ensure that the materials selected are compatible with the design. The indicated properties are intended to assure that the ROPS or FOPS will have meaningful resistance to brittle fracture. The impact toughness requirement is the conventional Charpy V Notch evaluation: it is primarily a quality control check and the indicated temperature does not directly relate to operating conditions. Three steel product categories are covered: hollow structural members, plates, bars and shapes, and castings.

Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

2013-07-09

CURRENT

J1119_201307

The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.

Standard

LUBRICATION CHART—CONSTRUCTION AND INDUSTRIAL MACHINERY

1982-06-01

HISTORICAL

J753_198206

The chart is to include basic maintenance items that the manufacturer considers essential for normal operation of the machine. The chart is not intended to cover all maintenance functions and should refer the user to the manufacturers’ manuals. Attachments may be included on the chart with the standard machine or covered by separate charts. When preparing a chart, consult SAE J752b, Maintenance Interval and SAE J754a. Lubricant Types.

Standard

REPORTING CLEANLINESS LEVELS OF HYDRAULIC FLUIDS

1986-03-01

HISTORICAL

J1165_198603

This SAE Recommended Practice has been formulated to advance and endorse the use of the ISO (International Organization for Standardization) Solid Contaminant Code as the universal means for expressing the level of particulate contaminant in hydraulic fluid and for specifying acceptable limits of cleanliness. Worldwide approval was gained for this coding system because it provides a simple, unmistakable, meaningful, and consistent means of communication between suppliers and users. The code applies to all types of hydraulic (liquid) fluids used in fluid power and control systems as applied to self-propelled machines as referenced in J1116.

Standard

HYDRAULIC EXCAVATOR OPERATOR CONTROLS

1978-04-01

HISTORICAL

J1177_197804

This recommended practice covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls.

Standard

SPECIFICATION DEFINITIONS-OFF-ROAD WORK MACHINES

1978-06-01

HISTORICAL

J1234_197806

This standard defines the more commonly used terms applicable to the majority of the machines defined in SAE J1057a and/or referenced by category in SAE J1116. Other SAE Standards will be used, when necessary, to define terms peculiar to a certain class or type of machine. Such other standards will be in accord with SAE J1234.

Standard

SPECIFICATION DEFINITIONS—FELLER/BUNCHER

1979-01-01

HISTORICAL

J1255_197901

This recommended practice includes the definitions of specification terms most commonly used to describe both wheeled and crawler type machines.

Standard

SPECIFICATION DEFINITIONS—FELLER/BUNCHER

1985-01-01

HISTORICAL

J1255_198501

This recommended practice includes the definitions of specification terms most commonly used to describe both wheeled and crawler type machines.

Standard

TRUCK IDENTIFICATION TERMINOLOGY

1978-05-01

HISTORICAL

J1229_197805

This SAL Recommended Practice is intended to provide uniform nomenclature and definitions for the primary levels of vehicle identification, with particular application to trucks. While this specific terminology applies only to trucks, work is in progress to develop supplementary nomenclature and definitions pertaining to other commercial vehicle terms and to terms presently used interchangeably in passenger car, truck, or other commercial vehicle applications. The supplementary terms will be covered in subsequent revisions to this recommended practice.

Standard

COMPONENT NOMENCLATURE–ARTICULATED LOG SKIDDER, RUBBER–TIRED

1975-05-01

HISTORICAL

J1109_197505

This standard includes names of major components and parts particular to this type of machine. Illustrations used here are not intended to include all existing commercial vehicles, or to be exactly descriptive of any particular machine. They have been chosen to describe the principles to be used in applying this standard.

Standard

Operator Controls on Industrial Equipment

2013-07-09

CURRENT

J297_201307

This SAE Standard is intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on industrial wheeled equipment. The controls covered are those centrally located at the operator's normal position.

Standard

Ship Systems and Equipment—Part Standard for Studs—Continuous and Double End (Metric)

2004-06-21

HISTORICAL

J2271M_200406

This SAE Parts Standard provides dimensional and quality assurance requirements for M6 through M36 metric sizes of studs in the following configurations in materials needed for ship system applications: a Continuous thread studs in M thread profile. b Double end studs—clamping type (also called bolt-studs) where both ends are of the same thread series but different lengths (M thread profile).

Standard

Labeling of ROPS and FOPS and OPS

2000-02-08

CURRENT

J1164_200002

This SAE Standard establishes the specifications and content for labeling of ROPS, FOPS, and OPS, which may commonly be a part of construction, forestry, mining, and industrial machines. The label content herein shall be applied to a ROPS and/or FOPS and/or OPS on any of these machines.

Standard

LABELING OF ROPS AND FOPS

1977-04-01

HISTORICAL

J1164_197704

ROPS and/or FOPS may commonly be a part of construction, forestry, mining, industrial, and agricultural machines. The label content herein should be applied to a ROPS and/or FOPS on any of these machines. See SAE J1116 for categories of machines.

Standard

Nomenclature - Hydraulic Backhoes

2012-11-01

HISTORICAL

J326_201211

This SAE Standard includes hydraulic backhoes which have no more than 190 degrees of rotational swing, and are mounted on wheel tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.

Standard

Tire Guards for Operator Protection—Earthmoving Haulage Machines

1999-05-24

HISTORICAL

J321_199905

This SAE Standard establishes a criteria for a minimum zone of protection for the operator of the machine and establishes certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h. Earthmoving machines covered by this document are dumpers and tractor-scrapers as identified in SAE J/ISO 6165.

Standard

Trailer Axle Alignment

1999-03-24

HISTORICAL

J875_199903

The scope of this SAE Recommended Practice, trailer axle alignment, is to identify the dimensional limits of, and a method to, establish a perpendicular relationship between the king pin centerline and the axle centerline at its midpoint. Various types of equipment are commercially available which can be used for this measurement which provides varying degrees of accuracy, but none can be endorsed by SAE. The most fundamental methods of measurement will be described here, but other equipment is available if a greater degree of accuracy is desired.

Standard

Trailer Axle Alignment

2011-06-13

CURRENT

J875_201106

The scope of this SAE Recommended Practice, trailer axle alignment, is to identify the dimensional limits of, and a method to, establish a perpendicular relationship between the king pin centerline and the axle centerline at its midpoint. Various types of equipment are commercially available which can be used for this measurement which provides varying degrees of accuracy, but none can be endorsed by SAE. The most fundamental methods of measurement will be described here, but other equipment is available if a greater degree of accuracy is desired.